Tune-Bot Gig Clip-on Electronic Digital Drum Head Tuner

SKU: TUNE-BOTGIG

$139.00
RRP $169.99
SAVE $30.99
Share:
  • GOLD COAST MUSIC
  • Out Of Stock
  • SYDNEY WAREHOUSE
  • Only 2 Left!
  • (Orders dispatched in 1 to 3 business days from Sydney)



(Orders dispatched in 1 to 3 business days from Sydney)




Tune-Bot Gig Clip-on Electronic Digital Drum Head Tuner

This is the very Latest Clip-on Drum Tuner from Tunebot.

It is simple & so easy to get your Drum in tune to suit your playing style or like your favioute Drummer

In 2012 Overtone Labs revolutionized drum tuning with the introduction of the tune-bot, the industry’s first digital tuner for acoustic drums. Now, after three years of additional research and development, Overtone Labs has introduced the new tune-bot gig, the fastest and easiest way to tune your drums. "With the new gig we wanted to simplify things so we started by reducing the number of buttons. Now one button allows you to toggle through the modes while matching lug pitch or tuning to a note." said Dave Ribner, Overtones Labs President and lead designer. The Gig features a large LCD display and is optimized for ease of use in the studio, on stage or in a practice room. The redesigned clip easily attaches to any standard drum hoop and the new silver body is easy to spot in your gig bag.

The tune-bot gig features an all new design with an improved display combined with a single button layout for ease of use.


  • signature tune-bot accuracy and precision
  • quickly tune acoustic drums
    • clip it on
    • tap the drum
    • match the lugs
  • clips to any standard drum hoop
  • simple compact design
    • large LCD display
    • optimized for ease of use
    • singe-button mode switching
    • Quick Start Guide For Measuring Fundamental Note

      Step 1: Mount the drum on a stand or hold it by the hoop so that both heads can resonate freely.

      Step 2: Clip the tuner to the drum hoop. Make sure the microphone end is over the drum head. Press power.

      Step 3: Hit lightly in the center of the drum head to measure the fundamental pitch. Hit hard enough for the red LED to flash. (the fundamental pitch is the lowest and loudest pitch your drum produces).

      Step 4: After you hit the drum, the frequency in Hz and nearest musical note will be displayed on the LCD screen and the needle will show you whether you are sharp or flat of the note. If the needle points to the left you are too low. If the needle points to the right you are too high. Adjust to the desired note by loosening or tightening the lugs. The needle should point straight up when you are tuned right on a note.

    • Quick Start Guide For Matching Lugs

      Step 1: Place the drum on a stool or a flat surface to prevent the bottom head from vibrating.

      Step 2: Clip the device to the drum hoop. Make sure the microphone end is over the drum head. Press power.

      Step 3: Hit one inch from any lug to measure a lug pitch. Hit hard enough for the red LED to flash. You should get a reading that is 20-100% higher than the fundamental for a typical lug pitch.

      Step 4: Go around to each lug, hitting one inch away from the lug. Adjust the lugs to similar pitches by tightening or loosening the closest lugs. Once all the pitches are within a range of 2 Hz you're usually close enough.

      *These are the basics, but there are some other very useful features like difference mode that you can check out in the manuals below.

SKU TUNE-BOTGIG
Barcode # 858580003023
Brand Tune-Bot

Be The First To Review This Product!

Help other Gold Coast Music users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category